Safety Regulations

• Machine installation and certain maintenance operations should only be performed by qualified service personnel.

• Do not attempt to remove covers or safety shields to access the interior of this machine or make repairs. Repairs should be made by an authorized technician or service center.

• Owners are liable for ensuring that users have been properly trained to operate the machine and understand the potential risks involved.

• The owner or installer will be liable for all non-authorized modification of the machine.

• Non-authorized alteration or modification of the machine will immediately void the manufacturer’s warranty.

• This manual references the machine at the time of sale. The commercial availability of subsequent versions including modifications, upgrades or adaptations does not oblige the manufacturer to apply any changes to this machine, nor is it obliged to update the documentation supplied.

• The manufacturer reserves the right to withdraw currently available manuals whenever deemed appropriate and reasonable.

• Periodically, some updates and changes may be required for this machine. In this event, a technician will be responsible for ensuring the change is made in accord with manufacturer’s specifications.

• Install the machine in a horizontal position and away from heat sources and flammable objects. 

• This machine should only be installed on a water-resistant work surface that is capable of adequately supporting the machine’s weight. 

• Place the machine in a location accessible only to personnel trained to operate it. Keep all hazardous packaging materials, such as plastic bags, Styrofoam, and staples, out of reach of children. 

• Plug the machine into a properly installed, earth grounded electrical outlet with line voltage that matches the specifications for the machine. 

• Ensure that the power supply voltage does not fluctuate by more than 6%. 

• Position the power cable so that users cannot trip over it. Keep the power cable away from sharp edges and heat sources. 

• Children should never be allowed to play with the machine. 

• This appliance is not suitable for installation in an area where a pressure washer may be used. 

• Do not use the machine outdoors, where it would be exposed to severe weather or extreme temperatures. 

• If the power cable is damaged, it may only be replaced by the manufacturer or its approved service technician. 

• Do not remove or disable any of the mechanical, electrical, or thermal protection safety equipment.
   

• The coffee machine has been designed and manufactured to make espresso coffee and other hot drinks (e.g., steaming and frothing milk). Do not use it for any other purpose.

• This machine is not intended for use in industrial kitchens, domestic kitchens, or similar locations. The manufacturer will not be held liable for damage to persons or property due to incorrect, improper or negligent use by nonprofessional personnel.

• To ensure optimal performance, install the machine in a location where these parameters will not be exceeded: 

- Maximum permissible inlet water pressure: 600 KPa (6 Bar) 

- Minimum permissible inlet water pressure: 200 KPa (2 Bar) 

- Maximum inlet water temperature: 40ºC 

- Ambient temperature is between +10 ºC (min.) and +40 ºC (max.).