Safety Regulations

Do not attempt to start the machine until you have acquired a suitable understanding of how it operates, by reading this manual. In case of doubts, even after carefully reading this manual, contact the technical assistance service.

Make sure that all personnel involved in using the machine are aware of the safety instructions.

• Before starting the machine, the operator must check for any faults and/or defects visible on the safety devices and on the machine. If any faults are found, immediately report them to the manufacturer or to the nearest authorized service center.

• The machine must only be used for the purposes for which it was intended and in accordance with the manufacturer’s instructions.

• Every day, check that all safety devices on the machine are operating correctly (see sections 3.2 and 8.5 of this manual).

• Safety devices must not be removed or bypassed for any reason.

• Any tampering with or modification of the machine not authorized in advance by the manufacturer shall release the manufacturer from any responsibility for injury/damage to people and/or objects.

• The identification plate and safety symbols/stickers applied to the machine must be kept in perfect condition. If they are damaged, they must be promptly substituted.

• Work on electrical connections must only be carried out by qualified technical personnel.

• The operator must be familiar with the machine controls as described in section 5.1 “Controls”.

• The operator must not carry out any operations which are not described in this manual.

• Only purchase and use original spare parts, which are guaranteed by the manufacturer.

•  Contact the dealer or the nearest service center to replace faulty or damaged components.

• Do not wear clothing, jewelry and accessories which may become tangled in machine moving parts.

• Keep the area around the machine clear and free of obstructions.

• Do not put fingers and/or objects in the machine slots or holes.

• Do not use the machine with damp or wet hands.

• Always wear suitable gloves and a hair cover for hygiene.

• Pay maximum attention to all caution and danger signs on the machine.

• The machine must be installed in a location protected from rain and sun.

• Do not allow water and/or liquids to penetrate the machine.

• Do not open the machine panels, since the machine contains components/parts which cannot be maintained by the user.

• Do not lean or sit on the machine while it is operating.

• Do not apply to the machine other devices which are not part of the kit supplied by the manufacturer.

• Clean the machine outer panels with soft cloths moistened with detergent for food-safe machines. Do not use water jets, as they may damage components/parts inside the machine.

• Do not use any kind of solvent, such as spirit, benzene or thinner to clean any of the machine surfaces.

• Do not operate the machine while under the effects of alcohol, mental health medications or medications in general.

• This machine must not be used by persons under the age of 18.

• Improper use of the machine may cause hazards for operators and/or may damage the machine.

• If the machine develops any problems not covered in this manual, contact the Technical Assistance Service.

• Use of the machine is not permitted in places with a potentially explosive atmosphere and in places with ambient conditions not envisaged in point 4.2 of this manual.

• The machine is not designed to be used by people with reduced physical, sensory or mental capacity.