Here you will find information about operating a pan/utensil washer.
Operating
Step 1:
- Press the On/Off button to start the appliance, this will also start the water intake and heating.
- While the appliance is supplying water to the tank, the boiler warning indicator will light up.
- Once the default water level is reach the boiler indicator should turn off and the storage warning indicator should light up. This means that the appliance is heating up.
- When the temperature is met both indicator will be turned off.
NOTE:
If the rinse aid and detergent are connect properly to the appliance, they will be automatically dispensed during the wash cycle.
When adding detergent manually, 1 tea spoon full of foam-less dishwasher detergent should be mixed into water tank of the machine after “Boiler Warning Lamp” and “Storage Warning Lamp” go off and 1 tea spoon full of foam-less dishwasher detergent should be added to the water tank for every 10 baskets of washing batch.
Step 2:
- Select the desired program using the program selection knob.
Programs
P1: Short wash program. Total operating time: 120(sec)
P2: Alternate wash program. Total operating time: 360(sec)
P3: Full wash program. Total operating time: 480(sec)
- Once the program is selected press the start button for the appliance to begin the washing cycle. The ‘’Program Warning Lamp” goes on when the washing operation starts and it goes off after the operation is completed.
- Clean dishes should be taken from their baskets after 30 seconds and then placed into their shelves.
ATTENTION!
In order that the machine operates efficiently and not to damage the dishwasher, baskets appropriate for the dishes should be chosen. Especially forks, spoons and knives should be washed in the baskets, which are designed for their use. Baskets different from the original ones supplied with the dishwasher and broken baskets should not be used.
If the cover of the machine is opened for any reason during water intake, washing or rinsing operations, the operation will be stopped.
Step 3:
- When the machine is no longer being used, daily maintenance should be carried out according to the "cleaning" guide.