Here you will find information about how to operate a planetary mixer.
Operating
Step 1:
- Plug the machine into the main socket.
- Before switching on the mixer select the desired mixing speed using the speed handle or knob.
Only use the lowest speed when mixing heavy dough.
ATTENTION! Do not overload the machine. Never fill the machine more than mentioned in the "Specification" table below.
When processing heavy dough, do not fill the bowl for more than 50% of its capacity.
In case of heavy operation the maximum capacity may even be less.
Consult your supplier in case of doubt.
Step 2:
- Once the speed has been selected, press the start button to activate the mixer. The safety guard must be closed for the mixer to operate. If the safety guard is open or not closed properly then the mixer will not function.
ATTENTION! In order to prolong the life span of the motor and gearbox, it is required that the mixer is turned off before switching from one speed to another.
To change speeds, stop the mixer. Once the mixer has come to a standstill, you can change the speed using the speed button or handle.
After the desired speed has been selected press the start button to reactivate the mixer.
ATTENTION! Changing the speed during operation may cause damage to the motor and/or gearbox.
NOTE:
When mixing light batches it is recommended that the mixer is not used continuously for more than 30 minutes. Allow the machine to cool down for approximately 15 minutes between mixing cycles.
When mixing heavy batches it is recommended that the mixer is not used continuously for more than 20 minutes. Allow the machine to cool down for approximately 30 minutes between mixing cycles.
If the appliance will not be used for a longer period, please remove the plug from the main socket.
