Here you will find information about operating a digital microwave oven.
Operations
Step 1:
- When the appliance is plugged in the display will show "0", this is the standby mode which will activate automatically if there's no activity for 30 seconds.
- Place the product you would like to heat up in a microwave safe container.
NOTE: Round or oval shaped containers are recommended, this helps cook the product more evenly.
- Open the door and place the product in the middle of the chamber, then close the door.
Step 2:
- Choose the desired power level by pressing the "POWER LEVEL" button on the control panel.
- The table above shows the available power levels depending how many times the power button is clicked.
- Use the numbers on the control panel to set the desired cooking time between 01 seconds to 99 minutes.
- Press the "START" button to begin cooking.
NOTE: During operation the cooking time can be adjusted using the "TIME +/-", you can also pause the cooking with the “STOP/RESET” button. If clicked twice the program that was set will be cancel.
Step 3:
- When the timer has finished a “0” will flash on the display and will beep 4 times. The beep will continue to sound every two minutes until you press any key or open the door.
- Remove your product with caution as it may be very hot to handle.
NOTE: If the appliance is not being used for a longer period then its recommended to remove the plug from the socket and following the "Cleaning" guide.
Functions:
Dual Magnetron: This appliance is fitted with two microwave transmitting magnetrons. By pressing the “SWITCH” key the user can choose to activate a single magnetron for reduced power consumption or both magnetrons for increased power output.
OneTouch Activation: If you want the program to start immediately after you have selected a preset (without also having to press the “START” key), press and hold the “STOP/RESET” key for five seconds until “P L” appears in the display. To deactivate this feature, again press and hold the “STOP/RESET” key for five seconds until “P” appears in the display.
Use count: Keep track of usage with the count function. While in standby mode, press and hold “STOP/RESET” and “POWER LEVEL” key simultaneously. The number on the display shows how many times the appliance has been used.
Child lock: This allows you to lock the oven from unwanted use. In locked mode all button’s are disabled.
1. While in standby mode, press and hold “PROG” key for 5 seconds.
2. A beep will sound and the lock icon will appear on the display.
3. Press and hold “PROG” key for 5 seconds again to deactivate lock mode.
Restore Factory settings: To restore all settings to factory default follow below steps:
1. Press and hold “START” and power on. All symbols will light-up and “00:00” will appear on the display.
2. Next, press “1, 2, 3, 4, 5, 6, 7, 8, 9, 0, POWER LEVEL, X2, PROG, SWITCH,+,-, TOP/RESET, START” keys consecutively and “00:18” will appear on the display.
3. Open the door, then shut it and open the door again. A beep will sound and the oven will return to standby mode (“0” on display). Factory default settings have now taken effect.
Preset programs: The following default programs are pre-installed to each number on the keypad.
The x2 mode can be used to double the preset programs above.
To modify the preset programs to your own selection you can do the following:
1. While in “standby” mode press “PROG” key [8] once.
2. Press the number key to which you wish to save the program.
3. Press “POWER LEVEL” key [3] to select power level.
4. Use the keypad [2] to select the desired cooking time.
5. (Repeat steps 3 and 4 before saving to set multiple stages).
6. Finally press “PROG” key [8] again to save program.