Here you will find information about cleaning a meat mincer.


 

Cleaning


 

Step 1:

  • Switch "OFF" and disconnect the power supply before cleaning or maintenance.
  • Check the power plug and power cable for damage. If either is damaged do not use the appliance until repaired by a electrical engineer.

 

Step 2:

  • Disassemble the hopper tray from the top of the appliance.
  • Unscrew the ring bolt from the exit hole.
  • Gently remove the grinding plate, cross blade and axis from the grinding mechanism.
  • Slide the worm gear out of the casing.
  • Unscrew the casing from the body using the hand screw. (For the MMM32 you may require a 17mm wrench/spanner)

Step 3:

  • Clean loose parts using soapy, warm water and mild food safe detergent.
  • Wipe down the exterior of the appliance and dry thoroughly.

ATTENTION! 

Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine. 

 

Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.

 

Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance 

 

Never let the power cable or power plug get wet or damp.