Here you will find information about operating a hot water dispenser.


 

Operation


 

Step 1:

  • Fill the dispenser to the desired liters as indicated on the glass water gauge on the frame of the appliance.

ATTENTION! 

The frame should be filled at least half way (5L) with water and never more than the maximum (10L). 


Never operate the machine without water in dispenser.

  • Close the frame with the cover on top and plug the appliance to the main socket.
     

Step 2:

  • Use the "ON/OFF" switch to power the appliance, the indicator will light up.

ATTENTION! 

Never move the appliance during use.


It’s recommended to not operate the appliance with your bare hands once it has been turned on. Make sure to use heat resistant gloves.

  • While the appliance is heating up the water, the indicator will stay lit.

NOTE: The appliance takes about 20 - 30 minutes to prepare a full pot of hot water.

  • Once the hot water is ready, use the tap to dispense into a container or cup. If the water level is no longer visible on the gauge, then you must turn off the appliance.

 

Step 3:

  • Once the appliance is no longer being used, please unplug the power cord and follow the "cleaning" guide.

NOTE: It’s recommended to clean the appliance after every use, to maintain and prolong its lifetime.