Here you will find information about operating a dry ice machine.


 

Operation

 

Step 1:

  • Open the CO2 valve and start the machine by pressing the power button, 3 lights should turn on with the following colors: red, green and blue from left to right.
         Red button is the general power button and the blue button will start the appliance.
  • Press the blue button to start the appliance, it will run for 60 seconds and then stop.

NOTE: The dry ice machine needs 120 seconds to produce a perfect ice block.

ATTENTION! never touch the appliance while operating and keep at least 1-meter distance.

 

Step 2:

  • To turn "OFF" the appliance, wait for the machine to stop operating, close the CO2 valve, and unscrew the cylinder on top of the appliance to remove the dry ice.
     

ATTENTION! Never use your bare hands to touch the cylinder or ice that is produced from the appliance, cryogenic gloves must be used when handling dry ice. Eye protection in the form of safety glasses, goggles, or face shields should also be worn when handling dry ice. (Safety Regulations)

  • To replace the CO2 cylinder, please follow the "CO2 replacement" guide.