Here you will find information about installing a dry ice machine.

Installation

Step 1:

• Take the dry ice machine out of the package and place it on the surface, lock the 3 screws on the machine with a hexagonal screw driver, but don’t lock it too tight.

Step 2:

• Connect the machine to the valve on the CO2 cylinder, keep the CO2 cylinder valve closed and screw on the hose. Place a rubber seal in the hose nut and use your fingers to tighten the nut to the CO2 cylinder valve.
  
• Use a wrench to strengthen the connection and make it airtight.

Step 3:

• Plug the appliance to the main socket.
  
• Screw the ice tube on the top of the appliance.