Here you will find information about operating an automatic feed juicer.


 

Operation


 

Step 1:

  • Fill the top basket with oranges and ensure the cover is well mounted, the appliance will only operate in the safety switch is activated.

ATTENTION! For the best output and prolongation of the equipment, we recommend using size 6 oranges. (67 mm - 76 mm)


If oranges are too big, the appliance may get jammed, this can cause severe damage to the gears and moving parts!

If oranges are too small the machine will also squeeze the peel resulting in very acidic/sour tasting juice.

  • Place a container under the dispenser to collect the juice.
  • Open the tap for the juice to automatically flow into the container you have placed by the dispensing area.

 

Step 2:

  • Press the green power button on the left side of the appliance.
     

ATTENTION! Do not power off the appliance while oranges are still inside during operation. Only power off when the last orange has been discarded.

NOTE: Certain models are equipped with a digital counter which will count the number of oranges processed until the machine is powered off.

 

Step 3:

  • Press the red stop button when finished using the appliance. This will also reset the digital counter if the machine is equipped with it. (available for models MAJ-50X & MAJ-80X)
  • Clean the appliance according to the "cleaning" guide at the end of each day the appliance has been used.

ATTENTION! Regular cleaning is necessary in order to keep the bearings and rubber seals intact. Not doing so will result in liquids slipping into the gears and mechanism, leading to potential rusting and fast deterioration of the appliance.

NOTE: If the appliance will not be used for a longer period, please remove the plug from the main socket.