In some rare cases, the automatic protection switch may activate, this will cause the appliance to not function. In this case, the machine will need to be reset.

To access the reset switch do the following:

ATTENTION: 
When performing maintenance on electrical equipment, always turn off and disconnect the power supply from any power source.

Step 1

Remove the outer panel on the left of the appliance, removing this panel should expose the power cable connections.

Step 2

Locate a black cover cap next to the power cord connections. Unscrew the black cap to expose the reset switch.

Step 3

Press the reset switch, set the cover back into place and mount the side panel.