Here you will find information about operating a cutlery polisher.

Operation

ATTENTION!
Before using the appliance, press start/stop and let the appliance run for about 20 minutes until it is warmed up.

• Once the appliance is warm, place the washed cutlery into the appliance through the loading hole on the top of the lid.

NOTE:
When the appliance is warm the cutlery inserted is dried and polished.

Results may not be as good if the appliance is not warmed up before using.

The UV lamp in the appliance also provides additional disinfection.

• Once the cutlery makes its way trough the inner maze, the remains of corn will be blown off by the fan located at the exit.
• The dry cutlery then drops out the front of the appliance, dried and polished.
• Once all the cutlery is polished, the appliance can be stopped by pressing the start/stop button once more.