How to set the hysteresis value on a Carel digital Display?
The hysteresis value determines the fluctuation of temperature between when the compressor is cooling and when the compressor is on stand-by.
- Hold the set button for 6-8 seconds.
- Go with the arrow buttons to setting “rd”
- Press set and change this setting to 2,0
- Press set and go the setting “c2”
- Press set and change this setting to 1
- Please hold the set button for 3 seconds, to save the settings.
The temperature fluctuation is now about 2-3 degrees. Less is not possible, this can damaged the compressor.
