Here you will find information about operating a deluxe potato peeler.


 

Operation

 

Step 1:

  • Plug the appliance into the main socket.
  • Lift the iron handle and place the product you would like to peel inside the appliance.

ATTENTION!

Make sure the products are placed within the abrasive surface of the peeling disk.

 

Step 2:

  • Turn on the water tap to a low water pressure.
  • Use the green button to start the peeler.
  • The appliance takes about 2-3 minutes for each cycle, don't let the appliance operate more than 5 minutes per cycle.

ATTENTION! 

Do not insert food in the machine while the machine is operational. 


Do not use your hands to get something inside of the appliance while operational. 

When the appliance is overloaded or stuck it will stop automatically, if this happens disconnect the appliance from the main socket and check inside for any stuck pieces or reduce the quantity being processed.

Step 3:

  • Use the rep button to stop the machine in case of emergencies.
  • When the cycle is finished press the white and green button simultaneously and hold the door open, this enables the machine to eject the contents at a low speed.

NOTE: Its advised to put a bucket or container in front of the appliance in order to catch the ejected products. 

Step 4:

  • The water will fall into the filter tank and then filtered to drain only the water and peels will remain on the filter tank.
  • When the appliance is not longer in use turn it "OFF" using the power switch located on the side of the appliance.

NOTE: Its recommended to clean the appliance daily due to hygienic regulations, please follow the "cleaning" guide.