Here you will find information about operating a potato peeling machine.


 

Operation


 

Step 1:

  • Plug the appliance into the main socket.
  • Place the product you would like to peel inside the appliance.

 

Step 2:

  • Turn on the water tap to a low water pressure.
  • Use the "ON/OFF" switch on the side of the appliance to start the peeler.
  • The appliance takes about 2-3 minutes for each cycle.
  • Use the switch on the side of the appliance to shut down the appliance after the cycle is finished. (Make sure you don't let the appliance operate longer than the recommended cycle)

ATTENTION!

Do not insert food in the machine while the machine is operational.


Do not use your hands to get something inside of the appliance while operational.

When the appliance is overloaded or stuck it will stop automatically, if this happens disconnect the appliance from the main socket and check inside for any stuck pieces or reduce the quantity being processed.

 

Step 3:

  • When the appliance is no longer in use turn it "OFF" using the power switch located on the side of the appliance.

NOTE: Its recommended to clean the appliance daily due to hygienic regulations, please follow the "cleaning" guide.