Here you will find information about operating a percolator.


 

Operation


 

Step 1:

  • Fill the dispenser to the desired liters as indicated on the glass water gauge on the frame of the appliance.

ATTENTION! 

The frame should be filled at least halfway (5L) with water and never more than the maximum (10L). 


Never operate the machine without water in dispenser.

  • Carefully place the filter on the brew funnel, fill the filter with grinded coffee and close the filter.
  • Carefully place it into the dispenser.

NOTE: When coarse grind is used, just place it into the gasket. When fine grind is used, we suggest you use a filter to prevent the grind from falling into the prepared coffee.

  • Close the frame with the cover on top and plug the appliance to the main socket.
     

Step 2:

  • Use the "ON/OFF" switch to power the appliance, the indicator will light up.

ATTENTION! 

Never move the appliance during use.

It’s recommended to not operate the appliance with your bare hands once it has been turned on. Make sure to use heat resistant gloves.

  • While the appliance is making coffee, the indicator will stay lit.

NOTE: 

The appliance takes about 45 - 60 minutes to prepare a full pot of coffee.

Leftover coffee can also be reheated, simply take out the filter assembly and warm on the coffee.

  • Once the coffee is ready, use the tap to dispense coffee into a container or cup. If the coffee is no longer visible on the gauge, then you must turn off the appliance.

 

Step 3:

  • Once the appliance is no longer being used, please unplug the power cord and follow the "cleaning" guide.

NOTE: It’s recommended to clean the appliance after every use, to maintain and prolong its lifetime.