Here you will find information about installing a meat mincer.
Installation
Step 1:
- The machine must be positioned on a flat and stable surface.
- Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat such as a cooker, oven or radiator.
- When positioning the appliance, maintain a distance of 10cm (4 inches) between the appliance and walls or other objects for ventilation and ease of use.
Step 2:
ATTENTION! Some parts mentioned in this section may be sharp, handle them with care.
See picture below for more information
- Attach the Axis (4) to the Worm Gear (5).
- Place the Worm Gear inside the Casing (6).
- Slide the Cross Blade (3) over the Axis, flat side facing towards the exit.
- Slide the Grinding Plate (2) over the Axis.
- Fix the mechanism in place by screwing on the Ring Bolt (1).
ATTENTION! Do not excessively screw the ring bolt as this will damage the blade or grinding plate when the appliance is operational.
- Finally attach the hopper tray to the top pipe.
Step 3:
- Level the appliance using the adjustable feet and position the machine in such a way that the plug is accessible at all times.
- Plug the power cord into the main socket.