Here you will find information about installing a glass freezer.


 

Installation


 

Step 1:

  • Attach the appliance to a table, bar, or countertop using the clamp at the bottom of the appliance.

NOTE: Max surface thickness supported is 15 - 80 mm.

  • Position the appliance away from sunlight or any other direct heat source and maintain a distance between other objects/appliances of 10 cm minimum.

 

Step 2:

  • To gain access to the battery holder to power the LEDs, remove the black plastic cover on top of the appliance.
  • Insert the batteries in the correct direction and close the black cover.

 

Step 3:

  • Connect the CO2 hose to the CO2 cylinder with a CGA320 valve. Make sure the CO2 cylinder valve is closed before connecting the hose.
  • Use a wrench to strengthen the connection.