Here you will find information about maintaining a gas stove.

Maintenance

This appliance requires periodic maintenance, depending on the usage, one must be carried out at least every 6 months. Periodic maintenance should be carried out by technical service personnel.

Step 1:

• Turn off the gas valve before any maintenance or cleaning.
  
• Check and clean the appliance, its parts, and accessories (if applicable).

Step 2:

• Close gas supply and remove the bottom panel for access to the gas circuit by removing the 4 screws holding the panel.
  
• Make sure injector openings are completely clean. Injectors can be changed depending on the country's gas regulations. 
• Air rings should be cleaned with a brush making sure there are no impurities in the flame channel.

• The pilot should be well-positioned in order for the flame to touch the thermocouple. The gas pilot is also equipped with a gas release nozzle, this can change depending on the country's gas regulations. 
• Gas hoses must be checked to ensure no impurities are clogged inside the gas hoses.

Step 3:

• Reassemble all dismantled parts
  
• Check gas lines and connections with soapy water to ensure there are no leakages after installation.