Safety Regulations

 

  • The machine may only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.

 

  • Keep the machine and electrical plug away from water and any other liquids. In the unlikely event that the machine should fall into water, immediately pull the plug out of the socket and have the machine checked by a certified technician. Not following these instructions could give rise to life-threatening situations.

 

  • Never try to open the casing of the machine yourself.

 

  • Do not insert any objects in the casing of the machine.

 

  • Do not touch the plug with wet or damp hands.

 

  • Regularly check the plug and cord for any damage. When the plug or cord is damaged, you should have it repaired by a certified repair company.

 

  • Do not use the machine after it has fallen or is damaged in any other way. Have it checked and repaired by a certified repair company.

 

  • Do not try to repair the machine yourself. This could give rise to life-threatening situations.

 

  • Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To pull the plug out of the socket, always pull on the plug and not on the cord.

 

  • Make sure that no one can accidentally pull the cord loose or trip over the cord.

 

  • Always keep an eye on the machine when in use.

 

  • Never put your hands near the moving parts of the machine.

 

  • Never let children use professional machines.

 

  • Always pull the plug out of the socket when the machine is not being used and always before cleaning.

 

  • ATTENTION! As long as the plug is in the socket the machine is connected to the power source.

 

  • Turn off the machine before pulling the plug out of the socket.

 

  • Never try to move or carry the machine by the power cord.

 

  • This machine may only be used for its intended purpose: cutting and blending food products.

 

  • Do not use any extra devices that are not supplied along with the machine.

 

  • Avoid overloading.

 

  • The electrical installation must satisfy the applicable national and local regulations.