Here you will find information about operating a drink dispenser.


 

Operation


 

Step 1:

  • Plug the appliance into the main socket.
  • Fill the plastic bowl with a liquid.

ATTENTION! The appliance cannot be turned on when there is no liquid in the bowl. Fill an empty bowl with water when it is not used and you wish to use the others.


 

Step 2:

  • Use the ‘mixing’ button at the back of the appliance to keep the liquids in motion.
  • Use the ‘cooling’ button at the back of the appliance to start cooling the liquids.

NOTE: The cooling temperature can be set between 7°C to 12°C.

  • To dispense the liquid, push against the desired metal lever with a glass and the liquid will be dispensed out of the tap.

 

Step 3:

  • When the appliance is no longer in use, use the "ON/OFF" button on the back to switch "OFF" the appliance.
     
  • Make sure to rinse any residue or droppings inside the liquid reservoir, this will prevent the appliance from developing a bad odor.