Here you will find information about how to set up your new combisteamer oven.
First Time Use
- Unpack and inspect your machine immediately after receipt. If there are any latent defects or damages to the machine, then immediately contact the freight carrier as well as your dealer.
Save all packaging materials in case the machine needs to be returned or for inspection by the freight carrier.
- All installations and setups should be done by authorized service agents, your dealer, or Maxima representatives.
- The machine must be positioned on a flat surface with sufficient space around the machine to allow for easy access to the machine, and for cleaning and ventilation.
- If your machine is supplied with a factory-fitted molded plug, then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible.
If your machine is not supplied with a factory-fitted molded plug, then a qualified electrical engineer must be contacted to wire the unit to the power supply.
- Clean the accessories and the appliance with lukewarm water and a soft cloth before using it for the first time (use water with a very mild detergent).
- After cleaning, wait for the appliance to dry completely and then plug the appliance into the power socket.
- Level and position the machine in such a way that the plug is accessible at all times.