Here you will find information about operating a churros maker.


 

Operation


 

Step 1:

  • Switch on the appliance by setting a desired temperature on the temperature dial. The heating indicator should turn on showing that the appliance is heating up.

NOTE: When heating the appliance for the first time its recommended to let the machine heat up for some time to get rid of any bad odor or impurities.

 

Step 2:

  • Once the heating indicator turns "OFF" the appliance has reached the set temperature and is ready for use.
  • Lightly coat the cooking plates with butter or cooking oil (non-stick baking spay also works well). This will help avoid the waffle sticking to the cooking plates. 

NOTE: Repeat this process every few batches.

 

  • Add just enough batter to cover the peak areas, do not overfill.
  • Close the lid and set the timer as desired, when the timer is done it will "ding".


 

Step 3:

  • Once the timer goes off, check if the product is cooked well and remove them carefully with a wooden or plastic utensil.

ATTENTION!

When removing the product from the appliance keep in mind that the plate is very hot and can cause serious burns, its recommended to wear protective gloves when handling the appliance.

  • When finished using the appliance turn "OFF" the appliance by resetting the temperature dial to "0".

NOTE: Its recommended to follow the "cleaning" guide at the end of each day where the appliance has been used due to hygienic regulations.