Here you will find information about setting up your new whipped cream machine.


 

First Time Use


 

  • Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to the machine, then immediately contact your dealer.  

Save all packaging materials in case the machine needs to be returned or for inspection by the freight carrier.

  • Remove any protective film from all surfaces.
     
  • If your machine is supplied with a factory fitted molded plug, then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. 

If your machine is not supplied with a factory fitted molded plug, then a qualified electrical engineer must be contacted to wire the unit to the power supply.

  • Make sure the appliance is not placed next the a direct heat source.

 

  • When placing the appliance ensure that the user will have enough space to operate the appliance and enough air circulation for the appliance to operate.

 

  • Clean the accessories and the appliance with lukewarm water and a soft cloth before using it for the first time (use water with a very mild detergent).

 

  • After cleaning, dry the appliance with a soft cloth completely.