Here you will find information about operating a compact pizza oven.


 

Operating


 

Step 1:

  • Switch the appliance "ON" with the power switch located below the light switch.
  • If you want to use the timer you may do so without switching the appliance "ON" from the main switch. The timer will activate the appliance until the time runs out.

 

Step 2:

  • Select the desired temperature using the thermostat. The 1x40 model is fitted with two thermostats (top and bottom). The 2x40 model is fitted with three thermostats (top, middle, and bottom).
  • Wait until the red temperature indicator lights up, this means that the oven has reached the desired temperature.
  • Open the door and place your product inside, and when cooked to the desired consistency remove the product from the oven.

 

Step 3: 

  • When the appliance is not in use make sure you reset the temperature knob before you turn "OFF" the appliance by pressing the switch to the off position.

ATTENTION!

If the appliance is switched off during operation without resetting the temperature, the power switch will burn, and the appliance may not be operational anymore.

NOTE: If the appliance is not being used for a longer period then its recommended to remove the plug from the socket and following the "Cleaning" guide.