Here you will find information about operating a hot dog warmer.


 

Operation


 

Step 1:

  • Take the inner basket out of the glass cylinder and remove the cylinder.
  • Once the two parts are removed, pour water on the aluminum plate. (The water level may not be higher than the base.)
  • Reassemble the parts once the water is in place.

ATTENTION!

Make sure that the water level is sufficient at all times.

Have caution while controlling the water level as the appliance may be very hot and could cause serious burns.

 

Step 2:

  • Plug the appliance in to the main socket and use the switch to turn on the appliance, the red light heating indicator will light up indicating that the appliance is heating up.
  • Use the temperature dial to set the desired temperature. (to preheat set temperature to "max").
  • For model with bread heating spikes make sure you turn on the spike heater from the second power switch on the left of the appliance.
  • Place your hot dogs inside of the metal basket inside glass reservoir.

(Video demonstration)

 

Step 3:

  • When the appliance is no longer in use, turn the temperature dial back to "0" and turn off the machine using the green "ON/OFF" switch.

ATTENTION! 

Always reset the temperature before turning off the appliance, if failed to do so the electrical switch may burn due to the excessive voltage sudden cut. 

  • Follow the "cleaning" guide to prolong the appliance life expectancy.

NOTE: Due to hygienic regulations it is recommended to clean the appliance daily.