Here you will find information about cleaning a tabletop dough roller.


 

Cleaning


 

Step 1:

  • Disconnect the power supply before cleaning or maintenance.
  • Check the power plug and power cable for damage. If either is damaged do not use the appliance until repaired by an electrical engineer.

 

Step 2:

  • Disassemble the roller scrapers from the inside of the appliance under the aluminum guard. This can be done by unclipping one of the scrapper sides and sliding it out.
     
  • The bottom scrappers can be disassembled by pulling the "O" rings under the appliance to unlatch the springs securing the bottom scrappers. Finally, pull the bottom scrappers out from the top.
  • Clean the appliance and lose parts using a damp cloth, warm water, and a mild food-safe detergent mixture. Always dry the appliance and accessories after cleaning using a soft cloth.

ATTENTION! 

Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine. 

 

Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.

 

Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance 

 

Never let the power cable or power plug get wet or damp.

 

Never clean the appliance or accessories in the dishwasher.