Here you will find information about operating a coffee grinder.


 

Operation


 

Step 1:

  • Load the bean hopper with your desired coffee beans.
  • Turn on the coffee grinder using the On/Off switch.
  • The beans will pass through the grinder and the ground coffee will fit the ground coffee dispenser. 

 

Step 2:

  • When the ground coffee dispenser is full, stop the coffee grinder using the On/Off switch.

ATTENTION ONLY FOR MODELS WITH AUTOMATIC STOP:

After starting the coffee grinder using the On/Off switch, the machine stops automatically when the ground coffee dispenser drops to a certain level, the coffee grinder starts up automatically, refills the dispenser and shuts down automatically once the dispenser is full.

  • Place the coffee-holder of the coffee machine against the Seal-saver, located right below the dispenser’s ground coffee outlet.
  • Pull the dispenser handle towards you to obtain a single measure. Release the handle for it to return to its position.
  • Place the coffee-holder of the coffee machine under the ground coffee press and press upwards to pack the ground coffee. 
  • If you want to obtain the same dose of ground coffee every time, try to keep the dispenser of ground coffee almost full. (This operation is automatic in the automatic model).

 

Step 3: (Adjusting coffee grinding thickness)

  • You can adjust the degree of grinding (finer/ coarser ground coffee) by adjusting the grinder as follows: 


- To obtain a FINER ground coffee: Keep the adjustment trigger pressed to free the adjustment platen and then turn the platen TO THE RIGHT as indicated by the “F” arrow on the platen. This operation is done while the grinder is operating.


 - To obtain a thicker ground coffee: Keep the adjustment trigger pressed to free the adjustment platen and then turn the platen TO THE LEFT as indicated by the “G” arrow on the platen. This operation is done while the grinder is operating.

 

Step 4: (Adjusting coffee dose)

  • To access the programming of the dose for 1 or 2 doses of coffee, press the chronometer button twice.
  • The simultaneously press the buttons 1 and 2 coffee doses.
  • Finally use the circular middle button to select the program you would like to edit.
  • Once the program is selected use the "+" & "-" buttons to edit the program.
  • Use the middle circular button to confirm your choice.