Here you will find information about cleaning a bottle cooler.
Cleaning
Step 1:
- Switch "OFF" and disconnect the power supply before cleaning or maintenance.
- Check the power plug and power cable for damage. If either is damaged do not use the appliance until repaired by an electrical engineer.
Step 2:
- Remove all products from the appliance.
- Clean the inside with warm water and mild food-safe detergent on a cloth.
- Wipe down the exterior of the appliance with a damp cloth and dry the entire appliance thoroughly.
- Remove and clean the shelves using a brush or sponge and warm soapy water. Rinse under tap afterwards to remove any soap residues. Always dry the shelves before placing them back inside the chamber.
ATTENTION!
Never clean loose parts in the dishwasher!
Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.
Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance
Never let the power cable or power plug get wet or damp.
Step 3:
- Make sure the air intake in the back of the appliance is well cleaned and there is no dust or blockages obstructing the air circulation.
- Clean a soft brush.