Here you will find information about cleaning a blast chiller.
Cleaning
NOTE: This appliance needs monthly "maintenance" please click the link for more information.
Step 1:
- Switch "OFF" and disconnect the power supply before cleaning or maintenance.
- Check the power plug and power cable for damage. If either is damaged do not use the appliance until repaired by an electrical engineer.
ATTENTION!
Never plug the appliance again in the socket within 10 minutes of removing it.
Step 2:
- Remove all products from the appliance.
- Clean the inside with warm water and mild food-safe detergent on a cloth.
- Wipe down the exterior of the appliance with a damp cloth and dry the entire appliance thoroughly.
- Remove and clean the shelves using a brush or sponge and warm soapy water. Rinse under tap afterward to remove any soap residues. Always dry the shelves before placing them back inside the chamber.
ATTENTION!
Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.
Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance
Never let the power cable or power plug get wet or damp.