Here you will find information about cleaning the ultimate blender.
Cleaning
Step 1:
- Plug the power cord and place the container with water / detergent mixture, then run the appliance for 10-30 seconds using the pulse button.
ATTENTION!
Never clean loose parts in the dishwasher!
Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol-based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.
Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance
Never let the power cable or power plug get wet or damp.
- Drain the cleaning mixture and rise the container with clean warm water.
- Place the container upside down to drain or dry with a clean dry cloth.
ATTENTION! Always make sure the bottom of the container doesn't get wet.
Step 2:
- Switch "OFF" and disconnect the power supply.
- Check the power plug and power cable for damage. If either is damaged do not use the appliance until repaired by a electrical engineer.
- Wipe down the appliance and dry thoroughly.